2Pin Latched Wire to Wire Poke-in Connector

This instruction sheet provides a simple guide to operating the 2Pin latched wire to wire poke-in connector. It is primarily applicable to products: 2834048-1, 2834048-2, 2834048-3, 2834048-4, 2834049-1, 2834049-2, 2834049-3, 2834049-4, 1-2834049-1, 1-2834049-2, 1-2834049-3, 1-2834049-4, 2-2834049-1, 2-2834049-2, 2-2834049-3, 3-2834049-1, 3-2834049-2, 2834050-1, 2834050-2, 2834050-3, 2834050-4. Refer to Specification 114-137159 for more detailed information.

Product Attributes

• Brand: Not specified
• Origin: Not specified
• Material: Not specified
• Color: Not specified
• Certifications: Not specified

Technical Specifications

Assembly Notes: Ensure power is disconnected when installing or removing the connector. Select appropriate tools and assembly methods based on production conditions. Insert stripped wire into the product slot until it cannot be inserted further. Insertion angle is 10 max. After insertion or during customer application, a straight wire distance of at least 5mm is required before bending.

Repair and Replacement: Components and wires within the connector are not replaceable or repairable. Do not use defective or damaged parts.

Process Precautions: Do not repeat insertion (connector is designed for single use; replace if unable to insert or if metal contacts are damaged). Do not force insertion. Avoid squeezing the connector end during assembly or disassembly. Prevent excessive force on wires during insertion and other processes. Ensure a straight wire distance after insertion.